Difference between revisions of "Moldorm Bounce"

From ALttPR Wiki
Jump to: navigation, search
(External Guides and Tutorials)
(2 intermediate revisions by the same user not shown)
Line 4: Line 4:
  
 
==Execution==
 
==Execution==
 +
There are three main components of the Moldorm Bounce: laying the bomb with the correct position and timing, putting Moldorm's head in a good position that will allow you to land on the South platform if you get the bounce, and hitting the head with your sword on the frame that the bomb explodes. These can each be accomplished in multiple ways, but you'll always lay the bomb first. To position the head, you can either bait a charge and hit Moldorm as he's moving or slash the tail to keep the head still where you want it. The latter is more consistent, but requires some tighter timing to get the final hit that will send you across the gap. The best way to land this hit is to select buffer and either use a regular slash timed by the bomb's color or to use a charged spin slash on the frame that the bomb explodes. A charged spin is recommended, but a regular slash can work if you run out of time for a spin.
  
# Start charging a sword spin and place a bomb near the bottom of the Moldorm2 arena. [[File:Bomb frame.PNG||thumb|right|Last frame of bomb explosion]]
+
Here is one example setup that can be used, step by step:
 +
 
 +
# Bait Moldorm into the upper half of the left or right side of the arena if he's not there already. This will make his movement a bit more predictable and easier to manipulate.
 +
# Face downwards and start charging a sword spin.
 +
# Place a bomb near the bottom of the Moldorm2 arena. [[File:Bomb frame.PNG||thumb|right|Last frame of bomb explosion]]
 
# Position Link so that when the bomb explodes it will hurt Link and also so that the sword spin will hit Moldorm's head.  
 
# Position Link so that when the bomb explodes it will hurt Link and also so that the sword spin will hit Moldorm's head.  
 
# As the bomb begins to explode, select buffer the explosion until the last frame before the bomb fully explodes and deals damage to the player.  
 
# As the bomb begins to explode, select buffer the explosion until the last frame before the bomb fully explodes and deals damage to the player.  
Line 14: Line 19:
  
 
===General Tips===
 
===General Tips===
Pulling off the Moldorm Bounce is tricky since it requires Moldorm RNG to cooperate with the player in order to both be within range without hurting the player and also be in the correct position to bounce in the right direction.
+
# Take some time to get familiar with Moldorm's movement patterns when practicing this. Most of his turns are RNG-based and unpredictable, but a familiarity with his movement can improve your reactions.
 
+
# You want to avoid unnecessary buffering, but it's useful for reacting to Moldorm's RNG and dodging him in addition to timing your hit with the bomb explosion.
Moldorm has a series of patterns that consist of a random turning of directions before charging directly at Link for a set of time. This charging can be utilized by baiting Moldorm into a corner before placing the bomb and then hoping for the charge pattern to happen at the correct timing. Additionally the player can damage Moldorm's tail to cause a small delay before Moldorm will charge at the player. This may require a large amount of trial and error in order to pull off.
+
# If you're trying to bait a charge from the upper half of the arena to the lower half, Moldorm can get stuck in the Southwest corners if you're standing too low. In some cases you'll need to stand above a certain Y position and move after he begins charging.
 +
# Moldorm has a series of patterns that consist of a random turning of directions before charging directly at Link for a set of time. This charging can be utilized by baiting Moldorm into a corner before placing the bomb and then hoping for the charge pattern to happen at the correct timing. Additionally the player can damage Moldorm's tail to cause a small delay before Moldorm will charge at the player. This may require a large amount of trial and error in order to pull off.
 +
# If you want to poke Moldorm's tail with your sword extended but don't want to lose your charge, you can save it by starting a dash when your sword makes contact with the tail then cancelling the dash, or by select buffering through the poke.
  
 
==Example==
 
==Example==
Line 28: Line 35:
  
 
*[https://www.youtube.com/watch?v=3DhTH9hz6Bo Osse's Moldorm Bounce Tutorial]
 
*[https://www.youtube.com/watch?v=3DhTH9hz6Bo Osse's Moldorm Bounce Tutorial]
 +
*[https://www.youtube.com/watch?v=KaxiwaNwLKw 10min of Moldorm Bounce Practice by Senen]

Revision as of 15:12, 4 December 2019

Moldorm Bounce

The Moldorm Bounce is a glitch that utilizes a unique damage boost caused by taking damage and hitting Moldorm's head on the same frame. This damage boost causes the player to recoil a longer distance than a normal Bomb Jump and is used to sequence break the Moldorm2 gap without Hookshot or utilizing Hovering.

Execution

There are three main components of the Moldorm Bounce: laying the bomb with the correct position and timing, putting Moldorm's head in a good position that will allow you to land on the South platform if you get the bounce, and hitting the head with your sword on the frame that the bomb explodes. These can each be accomplished in multiple ways, but you'll always lay the bomb first. To position the head, you can either bait a charge and hit Moldorm as he's moving or slash the tail to keep the head still where you want it. The latter is more consistent, but requires some tighter timing to get the final hit that will send you across the gap. The best way to land this hit is to select buffer and either use a regular slash timed by the bomb's color or to use a charged spin slash on the frame that the bomb explodes. A charged spin is recommended, but a regular slash can work if you run out of time for a spin.

Here is one example setup that can be used, step by step:

  1. Bait Moldorm into the upper half of the left or right side of the arena if he's not there already. This will make his movement a bit more predictable and easier to manipulate.
  2. Face downwards and start charging a sword spin.
  3. Place a bomb near the bottom of the Moldorm2 arena.
    Last frame of bomb explosion
  4. Position Link so that when the bomb explodes it will hurt Link and also so that the sword spin will hit Moldorm's head.
  5. As the bomb begins to explode, select buffer the explosion until the last frame before the bomb fully explodes and deals damage to the player.
  6. Once the final frame is buffered release B and close the menu so that the spin will release at the same time the bomb causes damage.

If all goes correctly the player will get large boost that can be enough to launch Link across the gap.


General Tips

  1. Take some time to get familiar with Moldorm's movement patterns when practicing this. Most of his turns are RNG-based and unpredictable, but a familiarity with his movement can improve your reactions.
  2. You want to avoid unnecessary buffering, but it's useful for reacting to Moldorm's RNG and dodging him in addition to timing your hit with the bomb explosion.
  3. If you're trying to bait a charge from the upper half of the arena to the lower half, Moldorm can get stuck in the Southwest corners if you're standing too low. In some cases you'll need to stand above a certain Y position and move after he begins charging.
  4. Moldorm has a series of patterns that consist of a random turning of directions before charging directly at Link for a set of time. This charging can be utilized by baiting Moldorm into a corner before placing the bomb and then hoping for the charge pattern to happen at the correct timing. Additionally the player can damage Moldorm's tail to cause a small delay before Moldorm will charge at the player. This may require a large amount of trial and error in order to pull off.
  5. If you want to poke Moldorm's tail with your sword extended but don't want to lose your charge, you can save it by starting a dash when your sword makes contact with the tail then cancelling the dash, or by select buffering through the poke.

Example

Moldorm Bounce Example
Moldormbounce(buffered).gif

External Guides and Tutorials